News-Jiangxi Huahuang Auto Parts Manufacturing | Honda

LANGUAGE ▼

NEWS

Home page

NEWS

Company News

Industry trends

Exhibition activities

How to disassemble and assemble Honda Lingpai brake pads

Removal method of Honda Lingpai brake pads: 1. Use a wrench and a socket to remove the bolts of the brake caliper and take down the brake pads. 2. Use the piston pump to press the piston to the position where it cannot be pressed, and then install the brake pads on the brake caliper. 3. After the new brake pads are installed in place (those with brake induction lines should also be installed), tighten the guide bolts and complete the installation.

2022

Composition of automobile brake system

The automobile has played a very important role in people's life and work, providing convenience for people's travel. But the safety of cars cannot be ignored. The brake system plays a very important role in driving safety. What is the composition of the brake system.

2022

Metal brake pads vs ceramic brake pads, are there different levels? Are ceramic brake pads "porcelain"

Compared with metal brake pads, ceramic brake pads are much quieter because they do not wear much. This reduces the pressure on the brake discs, which also means a longer service life. Are the brake pads still high or low? Why did the driver replace the metal brake pads and ceramic brake pads?

2022

What about the brake pads of the brake pads

In the daily driving process, many people will encounter the situation that the brake pads are worn by the brakes. When we have this or that kind of problem when driving, we will feel very upset. In order to avoid this situation, today we will talk about what to do if the brake pads are worn. Why wear the brake pads? When we are driving, a certain friction force is formed between the brake pads and the ground. When we step on the brake pedal, we will feel "bang bang bang" on the pedal. The brake is a kind of brake system used in the process of driving. The brake system is generally divided into four parts: brake pads, brake discs, friction pads, and the contact surface between brake pads and brake discs.

2022

When did the car first change its brake pads?

The brake pad is generally composed of a metal back plate, an adhesive thermal insulation layer and friction materials, with a thickness of about 1.5cm. The friction materials on the surface of the used brake pad will gradually be consumed with the braking frequency. As we wear the same pair of shoes for a long time, the rubber materials on the sole will wear thin over time. The same principle applies to the brake pad. When the friction materials are completely worn, they will directly rub with the metal back plate, There is not too much friction between smooth metal and metal, which will not only cause the car to brake, but also directly damage the brake disc. Therefore, in order to prevent serious wear and accidents, the manufacturer will set an alarm for the brake pads!

2022

Can brake calipers and brake pads be fastened

The brake calipers and brake pads cannot be used immediately after being installed, otherwise the brake calipers will be stuck and the brake system will be damaged in serious cases. The correct installation method is: first release the brake caliper, and then slide the brake pad into the caliper hole. The upper part of the caliper hole will lock the brake disc. Just screw the caliper circlip. It is not necessary to slide the brake pad into the caliper hole. So people usually install the circlip and then slide the brake pad into the caliper circlip to install the brake pad in place. However, this method is not desirable, because the material of the clip groove will affect the size of the braking force, which is not conducive to the installation of the brake pads, and the brake pads will be worn after the caliper circlip is unscrewed, which will easily cause damage to the brake system, so this method is not desirable. The correct installation method is: first unscrew the fixing nut on the circlip, and then slide the brake pad into the circlip slot. After installation, there will be a slight noise, but if there is no noise, it means that the brake pad has not reached the specified level, and you just need to slowly loosen the circlip.

2022

< 1 2 3 >

We have professional knowledge research and development team, production management team and after-sales service team.

Quick Links

Address: Wenzhen Industrial Park, Jinxian County, Nanchang, Jiangxi

Tel: 086-791-85540695

Fax: 086-791-85540685

Phone:86-18998298805

Email: sam_ai@naist.net