Company News-Jiangxi Huahuang Auto Parts Manufacturing | Honda | Toyota

NAIST

LANGUAGE ▼

NEWS

Home page

NEWS

Industry trends

Exhibition activities

What about the brake pads of the brake pads

What about the brake pads of the brake pads

In the daily driving process, many people will encounter the situation that the brake pads are worn by the brakes. When we have this or that kind of problem when driving, we will feel very upset. In order to avoid this situation, today we will talk about what to do if the brake pads are worn. Why wear the brake pads? When we are driving, a certain friction force is formed between the brake pads and the ground. When we step on the brake pedal, we will feel "bang bang bang" on the pedal. The brake is a kind of brake system used in the process of driving. The brake system is generally divided into four parts: brake pads, brake discs, friction pads, and the contact surface between brake pads and brake discs.

11

2022

/

11

When did the car first change its brake pads?

When did the car first change its brake pads?

The brake pad is generally composed of a metal back plate, an adhesive thermal insulation layer and friction materials, with a thickness of about 1.5cm. The friction materials on the surface of the used brake pad will gradually be consumed with the braking frequency. As we wear the same pair of shoes for a long time, the rubber materials on the sole will wear thin over time. The same principle applies to the brake pad. When the friction materials are completely worn, they will directly rub with the metal back plate, There is not too much friction between smooth metal and metal, which will not only cause the car to brake, but also directly damage the brake disc. Therefore, in order to prevent serious wear and accidents, the manufacturer will set an alarm for the brake pads!

11

2022

/

11

Can brake calipers and brake pads be fastened

Can brake calipers and brake pads be fastened

The brake calipers and brake pads cannot be used immediately after being installed, otherwise the brake calipers will be stuck and the brake system will be damaged in serious cases. The correct installation method is: first release the brake caliper, and then slide the brake pad into the caliper hole. The upper part of the caliper hole will lock the brake disc. Just screw the caliper circlip. It is not necessary to slide the brake pad into the caliper hole. So people usually install the circlip and then slide the brake pad into the caliper circlip to install the brake pad in place. However, this method is not desirable, because the material of the clip groove will affect the size of the braking force, which is not conducive to the installation of the brake pads, and the brake pads will be worn after the caliper circlip is unscrewed, which will easily cause damage to the brake system, so this method is not desirable. The correct installation method is: first unscrew the fixing nut on the circlip, and then slide the brake pad into the circlip slot. After installation, there will be a slight noise, but if there is no noise, it means that the brake pad has not reached the specified level, and you just need to slowly loosen the circlip.

11

2022

/

11

How to judge when the brake pads should be replaced and how to replace the brake pads

How to judge when the brake pads should be replaced and how to replace the brake pads

Most brake pads are made of iron, which is easy to rust, especially after rain. At this time, you will hear the hiss of friction when you step on the brake. This sound is normal for a short time, but if it is accompanied for a long time, the car owner will have to replace it. Because this phenomenon has shown that the wear of the brake pads has exceeded the limit. If it continues, it will affect the brake disc, and the hidden danger will increase after a long time.

11

2022

/

11

Changing with the Times, Two wheel Drive Boosts High quality Development of Enterprises | Jiangxi Huahuang: Strive to Build a Brake Pad Production Base in Jiangnan

Changing with the Times, Two wheel Drive Boosts High quality Development of Enterprises | Jiangxi Huahuang: Strive to Build a Brake Pad Production Base in Jiangnan

Foreword: If you want to stand up, you should stand up; if you want to reach the goal, you should reach the goal. During the past 40 years, China's manufacturing industry has grown from weak to strong. Behind its development and growth, a complete and powerful industrial chain and outstanding manufacturing strength have been formed, which is the cornerstone of the support of thousands of private manufacturing plants. Factory manufacturing strength is the guarantee for the development of the industrial chain.

11

2022

/

11

< 1 2 >

Naist

We have professional knowledge research and development team, production management team and after-sales service team.

Quick Links

Mercedes Benz series

Address: Wenzhen Industrial Park, Jinxian County, Nanchang, Jiangxi

Tel: 086-791-85540695

Fax: 086-791-85540685

Phone:86-18998298805

Email: sam_ai@naist.net

Copyright © 2022 Jiangxi Huahuang Auto Parts Manufacturing Co., Ltd